8 Attachment(s)
HCM - Bán 2 máy Cưa gỗ + 2 máy dán cạnh + Phay
CÔNG TY TNHH TM DV BÙI NGUYỄN
Địa chỉ: 25/28 đường số 05 , P. Bình Hưng Hòa , Q. Bình Tân ,TP. HCM'
Điện thoại di động: Mạnh Nguyễn 01636135542
Website : http://www.machinebuinguyen.com
Máy Phay Biesse Arrow TCR Twin Table CNC Machining Center (2001)
Wired 440v, 3PH
(2) 63” x 63” tables
(2) Routers
Motor plates not accessible
Each router has a ride along 10-position tool holder carousel
(19) Total HSK-F63 tool holders with tooling as shown
Horizontal / vertical boring aggregate
1.20 kW, 230/460v, 3PH
Vertical off-set “T” pattern boring
(5) Spindles in the X-axis
(9) Spindles in the Y-axis
(1) Spindle is shared in the X and Y axis
(1) Horizontal boring aggregate in the X-axis with one opposing spindle
(2) Horizontal boring aggregates in the Y-axis with one opposing spindle each
Pilot Panel Win Link rolling operator controller with screen
Free-standing electrical control cabinet
Hand-held operator controller
Front safety mat
Đính kèm 8524
Đính kèm 8525
Đính kèm 8526
Đính kèm 8527
Đính kèm 8528
Đính kèm 8529
Đính kèm 8530
Đính kèm 8531
8 Attachment(s)
Máy Cưa Homag Espana CH-03/32/32/Plus Front Loading Panel Saw (2000)
Homag Espana CH-03/32/32/Plus Front Loading Panel Saw (2000)
230/460v, 3PH
128” width capacity
Left side infeed fence
80” long x 2½” high
(3) Air flotation tables
25” wide x 72” long
Center table has floatation motor/fan assembly
1.10 kW, 3PH
Homag CNI VIC900 swing arm operator controller with screen
Rear roller skate type track table
Approximately 10’ long x 128” wide
Pusher fence
(6) Grippers with approximately 2¼” height
12” diameter blade capacity
6” diameter scoring blade capacity
Motor plates not accessible
Đính kèm 8534
Đính kèm 8535
Đính kèm 8536
Đính kèm 8537
Đính kèm 8538
Đính kèm 8539
Đính kèm 8540
Đính kèm 8541
12 Attachment(s)
Máy Cưa 1997 Homag CH-12/38/38 Front Loading Panel Saw
Máy Cưa 1997 Homag CH-12/38/38 Front Loading Panel Saw
230/460v, 3PH
24 DC
Approximately 12’ width capacity
Left side infeed fence 3¾” high
Hold down beam assembly
(3) Front air floatation tables
Approximately 25” x 72” each
Each table has a motor/fan assembly
1.10 kW, 220/440v, 3PH each
(1) Solid top infeed table with gravity roller end
Approximately 12” x 39”
Rear roller skate type track table
Approximately 13’ wide x 12’ long
Pusher fence with (6) clamping grippers
Approximately 4” clamping height
Homag NPS400 operator controller with screen and soft touch keypad
Đính kèm 8542
Đính kèm 8543
Đính kèm 8544
Đính kèm 8545
Đính kèm 8546
Đính kèm 8547
Đính kèm 8548
Đính kèm 8549
Đính kèm 8550
Đính kèm 8551
Đính kèm 8552
Đính kèm 8553
Máy Dán Cạnh Brandt Optimat KD 78/2 C Edgebander (2000)
Máy Dán Cạnh Brandt Optimat KD 78/2 C Edgebander (2000)
3½” wide rubber insert feed chain
Staggered cog tooth type rubber hold down beam assembly
Pellet type adhesive
2½” wide x 5” diameter driven side pressure roller
(3) 2½” wide x 3” diameter idler side pressure rollers
Front and back cut off
Top and bottom rough trim
Mechanical numeric digital readouts for up/down and in/out
Top and bottom fine trim
Mechanical numeric digital readouts for up/down and in/out
Top and bottom corner rounding
Top and bottom scraping
Top and bottom buffing
Sound/safety hood enclosure
Brandt operator controller
Screen
Soft touch keys
https://fbcdn-sphotos-c-a.akamaihd.n...f5134cbc83dfa5
https://fbcdn-sphotos-e-a.akamaihd.n...b23bbe7928aa1c
https://scontent-hkg3-1.xx.fbcdn.net...4f&oe=55E8770C
https://fbcdn-sphotos-e-a.akamaihd.n...a9488b5009a3ad
https://scontent-hkg3-1.xx.fbcdn.net...89&oe=56207DF7
https://scontent-hkg3-1.xx.fbcdn.net...3f&oe=56249CA3
https://scontent-hkg3-1.xx.fbcdn.net...51&oe=5632C2DE
https://scontent-hkg3-1.xx.fbcdn.net...d4&oe=5630921D
https://scontent-hkg3-1.xx.fbcdn.net...81&oe=561F79DF
Máy Cưa Brandt Optimat KD 94 Single Sided Edgebander (2000)
Máy Dán Cạnh Brandt Optimat KD 94 Single Sided Edgebander (2000)
Wired 230v, 3PH
3” wide rubber insert feed chain
Upper staggered rubber roller hold down beam
Pellet type adhesive
(1) 3” wide x 8” diameter driven side pressure roller
(4) 3” wide x 2½” diameter idler side pressure rollers assembly with mechanical numerical digital readouts
Front and back cut off
Top and bottom rough trim
1.5 kW, 1200 RPM
Mechanical numerical digital readouts for up/down and in/out
Top and bottom fine trim
.55 kW, 11000 RPM
Mechanical numerical digital readouts for up/down and in/out
Bottom scraper
Top Scraper
Top and bottom buffing units
3.0 kW, 3PH feed motor
Sound/safety hood enclosure
Brandt soft touch key controller
https://fbcdn-sphotos-d-a.akamaihd.n...d2b9682a551fd0
https://scontent-hkg3-1.xx.fbcdn.net...9f&oe=55F2824D
https://fbcdn-sphotos-h-a.akamaihd.n...a1c59508b6bd1c
https://fbcdn-sphotos-a-a.akamaihd.n...9b8585413bf07c
https://fbcdn-sphotos-g-a.akamaihd.n...ff8d2ab2083e61
https://fbcdn-sphotos-b-a.akamaihd.n...f3c1e75c6d532a
https://scontent-hkg3-1.xx.fbcdn.net...7a&oe=55EAB486
https://fbcdn-sphotos-d-a.akamaihd.n...dc165492179e28
https://fbcdn-sphotos-h-a.akamaihd.n...62e93f3cd5ebc8