"N0010 ;Filename: 7.tap
N0012 ;Post processor: Bridgeport V2XT.post
N0014 ;Date: 2/26/2017
N0016G21 ;Units: Metric
N0018 G71 ; input in metric
N0020 G75 ; Multiquadrant circle input on
N0022 G90 ; Absolute Positioning
N0024 G40 ; Cutter Comp off
N0026 G72 ; Transformation off
N0028 G30 ; Turn mirroring off
N0030 G80 ; Turn off any canned cycle
N0032 G73 A0.0 ; Rotate the part 0.0 degrees
N0034 M09 ; Turn coolant off
N0036 M25 ; Quill to home position (fully retract)
N0038 F10.0 ; set default feedrate is 10.0 ipm
N0040 G04Q2.0 ; set default dwell time to 2 seconds
N0042 G17 ; XY plane select
N0044 G94 ; feed in units/min
N0100 ;Process: Plasma, 0, Plasma, 1.2 mm kerf
N0110 M25 ; Quill to home position (fully retract)
N0120 G00 X0.0 Y0.0 ; Rapid to tool change position
N0130 M06 T01 ;Plasma, 1.2 mm kerf"
Anh Hưng cho em hỏi nhờ, em dùng sheetcam xuất code, file code mô nó cũng bị như vậy cả. Đó là lỗi gì?