--- Tình hình gom được hơn 1 chục con step 2 pha USA
* Size 57, dài 75 , cốt 6.35mm
* hold torque 1.77N.m ( bipolar 4 dây )
* tốc độ 600rpm vẫn đạt 1.2N.m
* 6.6 A quá ngon cho mấy em step USA
* Ý kiến cá nhân đã từng sài qua nhiều loại động cơ thì mấy em USA là ngon nhất , đáp ứng tốc độ rất cao, dòng cao , chạy rất êm .
Cuối cùng giá cho mỗi em là 250K ( ship cho 1 em là 30K , cho 3 em là 50K , còn mua hết là free ship---có tổng cộng 14 em)
Nam 0908415648
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
để em 1 con, bổ sung bộ sưu tập motor test của em
hôm nào tiện đường em tạt qua lấy được ko ah?
b.r
A Nam có con spindle nào nhẹ nhẹ ko, khoảng trên dưới 1kw ( chủ yếu dùng để phay mica ) e tính thay thế con maktec,
khi nào có nhắn e nhé. e cám ơn anh nhiều.
con nào trọng lượng nhẹ càng tốt )
ok Linh , khi nào ghé qua nhớ gọi dt nha. Còn có thêm mấy con có encorder thích em nào anh để lại đúng giá mua về mà thí nghiệm.
trên dưới 1kw thì chỉ có mấy em TQ là phù hợp thôi , không có con nào dưới 5kg đâu
Lần sửa cuối bởi Nam CNC, ngày 26-05-2014 lúc 09:11:46 AM.
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
thèm quá,nhưng đang hết tiền,bác bán khi nào xong máy thanh toán đi,hehe
bác vs bác Quảng rất là hay làm AE chảy nc miếng.
Lần sửa cuối bởi linhdt1121, ngày 26-05-2014 lúc 09:49:07 PM.
Anh Nam có con spind nào tầm 3kw , tốc độ khoảng 9000 chuyên dùng phay thép không ?
Mấy con chuyên dùng như vậy ai củng săn tìm hết à, đa số tốc độ đó đều chơi qua dây đai , rất khó tìm được 1 em built-in lắm. Mà nếu bác thích chơi kim loại thì chổ gá spindle đủ rộng , đủ mạnh để kéo mấy em tầm 40-80kg không ?
----- thấy phía TQ có bán mấy em tốc độ tầm đó 9000-12000 rpm, er20 , giá hơn 3500 tệ , vận chuyển nữa thì không biết bác kham nổi không ???
@Linh.... nói thiệt bác hết tiền không quan trọng bằng hết hàng mình đang cần hehehe , hết tiền có thể mượn chứ hết hàng rồi thì tìm đâu ra ????
Lần sửa cuối bởi Nam CNC, ngày 27-05-2014 lúc 08:11:34 AM.
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
Tình hình có 2 anh em máu me chế tạo máy đã hốt và đặt gạch tổng cộng 6 em rồi, thêm 1 em của chú Nhat Son nữa , chỉ còn 7 em thôi nhé, nhanh tay lên kẻo muộn, biết bao giờ mới thấy mấy em USA mini 57 mà 6.6A hehehe.
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
tình hình có vẻ căng,thôi tối e về mượn thẻ rùi gửi luôn cho bác cho nó chắc.
người gửi là:Nguyên Quốc Hưng bác nhé,tối nó đi làm về e kêu gửi luôn.
ngoài lề chút,có bác nào biết cái ký hiệu chữ R viết ngược cạnh chữ slosyn.com nó là gì ko,em thấy nó rất nhiều mà chả hiểu là gì cả.
Lần sửa cuối bởi linhdt1121, ngày 27-05-2014 lúc 11:57:02 AM.
nhãn hiệu đã được đăng kí bảo hộ
more info
http://en.wikipedia.org/wiki/Registe...ademark_symbol
The UL Listing Mark
This is one of the most common UL Marks. If a product carries this Mark, Underwriters Laboratories found that samples of this product met UL's safety requirements. These requirements are primarily based on UL's own published Standards for Safety. This type of Mark is seen commonly on appliances and computer equipment, furnaces and heaters, fuses, electrical panelboards, smoke and carbon monoxide detectors, fire extinguishers and sprinkler systems, personal flotation devices like life jackets and life preservers, bullet resistant glass, and thousands of other products.
Product testing can be verified through UL directories online at http://www.ul.com
The CSA Mark
The Canadian Standards Association (CSA) is a nonprofit association serving business, industry, government and consumers in Canada and the global marketplace. Among many other activities, CSA develops standards that enhance public safety.
A Nationally Recognized Testing Laboratory, CSA is very familiar with U.S. requirements. According to OSHA regulations, the CSA-US Mark qualifies as an alternative to the UL Mark.
Here are some areas where CSA standards are applied:
Canadian Electrical Code, Part III-Outside Wiring
Electrical Engineering Standards
Electromagnetic Compatibility
The CE Mark
The European Commission describes the CE mark as a "passport" that allows manufacturers to circulate industrial products freely within the internal market of the EU. The CE mark certifies that the products have met EU health, safety and environmental requirements that ensure consumer and workplace safety. All manufacturers in the EU and abroad must affix the CE mark to those products covered by the "New Approach" directives in order to market their products in Europe. Once a product receives the CE mark, it can be marketed throughout the EU without undergoing further product modification.
Most products covered by New Approach Directives can be self-certified by the manufacturer and do not require the intervention of an EU-authorized independent testing/certifying company (notified body). To self-certify, the manufacturer must assess the conformity of the products to the applicable directives and standards. While the use of EU harmonized standards is voluntary in theory, in practice the use of European standards is the best way to meet the requirements of the CE mark directives. This is because the standards offer specific guidelines and tests to meet safety requirements, while the directives, general in nature, do not.
The manufacturer may affix the CE mark to their product following the preparation of a declaration of conformity, the certificate which shows the product conforms to the applicable requirements. They must maintain a technical file to prove conformity. The manufacturer or their authorized representative must be able to provide this certificate together with the technical file at any time, if requested by the appropriate member state authorities.
There is no specific form for the declaration of conformity, but specific information is required. The declaration must include the following:
(1) The manufacturer's name and address.
(2) The product.
(3) The CE mark directives that apply to the product, e.g. the machine directive 93/37/EC or the low voltage directive 73/23/EEC.
(4) The European standards used, e.g. EN 50081-2:1993 for the EMC directive or EN 60950:1991 for the low voltage requirement for information technology.
(5) The declaration must show the signature of a company official for purposes of the company assuming liability for the safety of its product in the European market. This European standards organization has set up the Electromagnetic Compatibility Directive. According to CE, The Directive basically states that products must not emit unwanted electromagnetic pollution (interference). Because there is a certain amount of electromagnetic pollution in the environment, the Directive also states that products must be immune to a reasonable amount of interference. The Directive itself gives no guidelines on the required level of emissions or immunity that is left to the standards that are used to demonstrate compliance with the Directive.
The EMC-directive (89/336/EEC) Electromagnetic Compatibility
Like all other directives, this is a new-approach directive, which means that only the main requirements (essential requirements) are required. The EMC-directive mentions two ways of showing compliance to the main requirements:
Manufacturers declaration (route acc. art. 10.1)
Type testing using the TCF (route acc. to art. 10.2)
The LVD-directive (73/26/EEC) Safety
Like all CE-related directives, this is a new-approach directive, which means that only the main requirements (essential requirements) are required. The LVD-directive describes how to show compliance to the main requirements.
b.r
Lần sửa cuối bởi nhatson, ngày 27-05-2014 lúc 12:13:41 PM.
Em hot het phan con lai thi bac giam 50% nhe ;D
báo cáo, UL 1 tổ chức kiễm tra độ an toàn, hãng dùng logo này cho
UL Recognized Component Marks for Canada and the United States
http://www.ul.com/global/eng/pages/c...arks/mark/art/
Lần sửa cuối bởi nhatson, ngày 27-05-2014 lúc 12:52:15 PM.
bác GAMO mơ hả ???? ai đời đi bán lổ cho bác !!!!!
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
em đùa thôi mà
Trời ơi, thấy bác Nhat Son giải thích xong thấy chữ AU và CE mà thấy mấy con này giá trị thiệt hehehe. bác gamo giỡn mà em ú tim.
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
Uay, bac de em 1 con nhe, cho vao bo suu tap. Ko tuong tuong dc la 6.6A ma V=1.3 thi no se ra sao
Hehehe thêm 1 em vào bộ sưu tập bác GAMO . còn lại 6 em thôi..... nhanh nhanh hàng nóng hổi vừa thổi vừa tiếc.
Nguyễn Hoàng Nam
n_h_n2002@yahoo.com DT: 0908415648
Cảm ơn bác Vinh nhé, để mai em ra đó xem thử. Chỗ đó em dạo này ít ghé do một dạo nó cứa cổ em đau quá.
Bác Nam cứ giữ 1 con cho em nhe. Cuối tuần em qua thăm bác, tiện thể shopping luôn
Lần sửa cuối bởi Gamo, ngày 27-05-2014 lúc 08:35:24 PM.