Hello I like to meet wiht somebody English speaking in Hanoi

[flexbex]

Hello I live in Hanoi. I do not speak Vietnamese. I am an Embedded Engineer System from Germany. I want to build my first low cost CNC Hotwire cutter. Now I am looking where to get parts in Hanoi. Maybe someone wants to meet and exchange with me in Hanoi. No problem if you do not speak English we can still use Googel Translator. What i am especially looking for are very long guide rails (3m). I would be happy if somone wnats to take the time.

Thank you very much Felix

[hqkcnc]

Hello I live in Hanoi. I do not speak Vietnamese. I am an Embedded Engineer System from Germany. I want to build my first low cost CNC Hotwire cutter. Now I am looking where to get parts in Hanoi. Maybe someone wants to meet and exchange with me in Hanoi. No problem if you do not speak English we can still use Googel Translator. What i am especially looking for are very long guide rails (3m). I would be happy if somone wnats to take the time.

Thank you very much Felix

Hi,
Welcome to Vietnamese CNC forum. many suppliers in Vietnam they can help you to supply parts for DIY CNC plan. i can suggest one shop by this image, please try to contact with them.

Sorry, my English is not so well.
Thanks.

[ktshung]

I think you can work with Mr Luyen (0987302460), he is living near Hanoi and can help you. If you need help, call me (Hung 0914002202) I can speak English but I'm living in Hue (650km from Hanoi). Thanks

[ktshung]

http://forum.cncprovn.com/threads/95...-don-kho/page7
Hey guy! there is a 3,5m rail as your request in this link. If you want to buy, I can help

[garynguyen]

Hi Felix
I live in ha noi and working in Hoan Kiem distric. I sell some cnc 2nd parts and know some suppliers that they sell china cnc part (new). Pls fell free to contact me: 0938575368

[khoa.address]

Mấy bác ở trên nói về cái gì ấy nhỉ???

Ps: Hihi, e vui tí thôi ah. Lâu 4r có ông "Tây" comment phát mà nhộn nhịp hẳn lên.

[Gamo]

Để kêu mấy chú Tây học trò lên đây post vài bài

[hung1706]

Please check your grammar.
Căng thế nhờ )))

[Gamo]

Check làm chi? Mấy chú Tây chưa chắc nói tiếng Anh chuẩn ngữ pháp bằng dân Dzịt Nôm đâu

[IRF945]

Hello I live in Hanoi. I do not speak Vietnamese. I am an Embedded Engineer System from Germany. I want to build my first low cost CNC Hotwire cutter. Now I am looking where to get parts in Hanoi. Maybe someone wants to meet and exchange with me in Hanoi. No problem if you do not speak English we can still use Googel Translator. What i am especially looking for are very long guide rails (3m). I would be happy if somone wnats to take the time.

Thank you very much Felix

yeal!!! I think I can help you !!!

[hanasimitai]

Có ông tây mà cứ hoắng hết cả lên. Hỏi ông cần gì và có tiền không?

[mactech]

Hi Felix,
welcome to this forum. There are 3 types of part selling in Vn, one mostly is Japanese second hand that disassembled from old machine and Chinese brand new, last is Euro spare parts. We also use Japanese one cause low cost that members sell here with reasonable price. With 3m long I saw some from Saigon members have ex named MINHAT, thanhhaitdt that trustful members I do times.
But If you want to custom raw frame in Hanoi contact mr.Luyen 0987 302460 moderator in this forum at can work well, his place right Van Diem Interchange. If still want to DIY pls post your idea and draw frame I believe many will contribute here.
Rg,
Thanh

[flexbex]

Hello thx for all the nice replys. First about my Grammar i am not an English teacher I am an engineer from Germany. Engineers don't have time for Grammar ;-).
Ok but the others I will contact mr.Luyen. Also garynguyen and IRF945. @ktshung Thx for the link. It looks very interesting. But I think it is to expensive for my first time CNC. The second hand Japanese parts is the best option for now i guess.

Maybe about my plan. I want to cut plates for Surfboards from EPS foam. Because of the large scale I was reading my best option is a chain driven CNC for the X-Axis. The machine should have two options one router for wood and foam carving. this one will have y and z axis movement. and a hotwire with Z axis movement.
For the guide rails I was thinking of Alu profile rais. But these are just my first ideas after reading a bit about CNC's.



this part looks good for to me.

[QuyND]

Guten Abend! Willkommen in Vietnam.

I think you should tell us how precise you would like so we can help you better. Also, if you want to have a router for wood, i think you should go with the round rail, they are cheaper than the square rail but still pretty precise for wood router.

[mactech]

Hi,
The alu frame will be weak and cost long time to align. I think solid beam solder is not an expensive option in Vn, refer to Mr. L... will get the idea that include square rail is more precise than round one, ofcourse need dust cover while working work wood to avoid getting stuck. Chain is not good while long trace compare with rack-gear, chain extends itself with time.
rg,

[kzam]

CNC cắt xốp siêu rẻ nên chạy dây đai kiểu Openbuild thôi.

[flexbex]

CNC cắt xốp siêu rẻ nên chạy dây đai kiểu Openbuild thôi.

Openbuild looks very good. Thx.

In the moment I try to figure out what is possible and what the cost are.
To get an idea of what I want to build you can watch this youtube video https://www.youtube.com/watch?v=awQIgS0oPk4
The Machine can hotwire and route in one. For me i prefer Aluminium because it is easier to transport as I have to bring the machine in one year to Germany. @QuyND sprichst du Deutsch? ;-)
The machine will be used mostly for foam (EPS) but if I could use it also for wood it would be perfect. Dust is no problem i think because I will vacuum as in the video. I can not say how precise it has to be but i will definitly research for information about that.

[QuyND]

Ich spreche ein bisschen Deutsch.

In the video, i think they use extruded aluminum as frame and square linear rail. From your previous post, you are using the extruded aluminum also as rail. Using extruded aluminum as rail is cheap, but not too much reliable, they need alot of maintain and calibration. About Round and Square Rail, you can check this website out, i think they have pretty much every information you need about those two. http://www.machinedesign.com/archive/round-or-square

Also check this out:


Hope these help.
Viele Grüße.

[Diyodira]

Có ông tây mà cứ hoắng hết cả lên. Hỏi ông cần gì và có tiền không?

Nên lịch sự và có trách nhiệm giữ thể diện chung, họ hiểu hết

Add có lướt qua thì xóa dùm post này của mình luôn, tks

[flexbex]

Nên lịch sự và có trách nhiệm giữ thể diện chung, họ hiểu hết

Add có lướt qua thì xóa dùm post này của mình luôn, tks

Người phương Tây cũng có thể hiểu tiếng Việt với Google Translator. ;-)