Getting my project further

[flexbex]

Hello first thanks for all your replies. I was convinced from some members to make it in steel. To have a strong solution for also cutting wood. It also became bigger now. I hope you like the drawing
In the end you will find some pictures.
Now i am looking for some material. I heard the second hand Japanese should be the best.
But i take what i can get:

2 x 3600 mm linear guide rail (don't have to be in one part 3x1.2m also ok)
2 x 1200mm linear guide rails
2 x 400mm linear guide rails
and of course sliding blocks

1 x 3600mm rack pinion
5:1 gear box to drive the rack pinion

4 x stepper motors

300 - 400 mm Ballscrew
Ballscrewnut
2x Ballscrewsupport

If anybody have this part I would be very happy to buy them.

Link to Autodesk Viewer
https://autode.sk/2v0Hk9T