Tôi đang tìm kiếm các bộ phận ở Hà Nội / I am looking for Parts in Hanoi

[flexbex]

Xin chào Tôi đang tìm kiếm các phần sau:
[Vui lòng xem thêm về phiên bản tiếng Anh gốc]
[English below]


2 x 3600 mm Thanh trượt (20mm chiều rộng)
2 x 1200 mm Thanh trượt (20mm chiều rộng)
2 x 400 mm Thanh trượt (20mm chiều rộng)

10 x Con trượt
1 x 3600 mm THANH RĂNG THẲNG


4x ĐỘNG CƠ BƯỚC

400 mm Ball Screw
Ballscrewnut
2x Ballscrewsupport

[English]
Hello I am building a CNC in Hanoi. For this I am looking for the folowing parts in Hanoi.

linear guide rails with a minimum width of 20mm
2 x 3600 mm linear guide rail (also possible in multiple parts)
2 x 1200mm linear guide rails
2 x 400mm linear guide rails

10x sliding blocks

1 x 3600mm rack pinion
5: 1 gear box to drive the rack pinion

4 x stepper motors

400m Ball Screw
Ballscrew Nut
2x Ballscrewsupport

Thank you very much

[Diyodira]

Dear Flexbex

[English]
Hello I am building a CNC in Hanoi. For this I am looking for the folowing parts in Hanoi.

linear guide rails with a minimum width of 20mm
2 x 3600 mm linear guide rail (also possible in multiple parts) : Rexroth made in Germany 1980 x 4 bars x 4 blocks
2 x 1200mm linear guide rails : THK made in Japan 1200 x 2 bars x 4 blocks
2 x 400mm linear guide rails : IKO made in Japan 460 x 2 bars x 4 blocks

10x sliding blocks

1 x 3600mm rack pinion: Includes 4 bars and 1 gear from Japanese machine 980 x 4 bars x 2.0M, gear with 40teeth and hole dia.24

Good, original, clean is beautiful
9.500.000vnđ for all, free ship to Hanoi






5: 1 gear box to drive the rack pinion

4 x stepper motors

400m Ball Screw
Ballscrew Nut
2x Ballscrewsupport

Thank you very much

[Diyodira]

Dear Flexbex







5: 1 gear box to drive the rack pinion

4 x stepper motors

400m Ball Screw
Ballscrew Nut
2x Ballscrewsupport

Thank you very much

[flexbex]

:-) That sounds good. I will do it. My number is 0936083820. Let's make appointment.

[Diyodira]

Dear Flexbex
You can give your address in Hanoi, I will ship to you first, because this product is used, I think you are German, so your quality standard is different from in Vietnam. After looking at the product, if you really like it and then you buy, if you do not like then you can send it back to me, I will pay all shipping fee.

I am happy to see that you have the items you like to make cnc machine in Vietnam

Sincerely thanks

(Google dịch thần thánh thiệt -)

[Bongmayquathem]

Dear Flexbex
You can give your address in Hanoi, I will ship to you first, because this product is used, I think you are German, so your quality standard is different from in Vietnam. After looking at the product, if you really like it and then you buy, if you do not like then you can send it back to me, I will pay all shipping fee.

I am happy to see that you have the items you like to make cnc machine in Vietnam

Sincerely thanks

(Google dịch thần thánh thiệt -)

Phải google dịch không vậy ?

[Diyodira]

Phải google dịch không vậy ?

thiệt mà bác, nhìn biết liền chứ gì, tks

[minhdt_cdt10]

anh cần đông cơ bước loại nào.
em đang có step 2 pha size 86x90
HBS86

[thanhhaitdt]

Vitme 4 triệu 4 cây




Step motor 4 triệu 4 con


Cây bên dưới : hành trình 650mm giá 1.5 triệu/1

[audiophilevn]

@Flexbex: you're lucky , Viet Nam is paradise of 2nd materials

[flexbex]

@Flexbex: you're lucky , Viet Nam is paradise of 2nd materials

Yes i just found out. We should export to Germany. :-)

[flexbex]

Dear Flexbex
You can give your address in Hanoi, I will ship to you first, because this product is used, I think you are German, so your quality standard is different from in Vietnam. After looking at the product, if you really like it and then you buy, if you do not like then you can send it back to me, I will pay all shipping fee.

I am happy to see that you have the items you like to make cnc machine in Vietnam

Sincerely thanks

(Google dịch thần thánh thiệt -)

Hello thank you very much for your trust. ;-)
Can we wait some days until I have my contract for my workshop in Đường Nguyễn Hoàng Tôn. Then I don't have to transport two times. Actually don't worry about the quality it is my first time building CNC so I am happy to take everything I can get.

[itanium7000]

Yes i just found out. We should export to Germany. :-)

Chết cười với bác này

[flexbex]

Vitme 4 triệu 4 cây




Step motor 4 triệu 4 con


Cây bên dưới : hành trình 650mm giá 1.5 triệu/1

Hello Yes I am interested for the motors. But I will first setup my workspace. And then ask you again. Thank you for the offer

[thanhhaitdt]

Hello Yes I am interested for the motors. But I will first setup my workspace. And then ask you again. Thank you for the offer

Nói gì dạ. Sắp vô kèo ah

[Diyodira]

Nói gì dạ. Sắp vô kèo ah

Anh ấy kết hàng của bác rồi đó, để ảnh dọn dẹp phòng ốc giường chiếu gọn sạch rồi gọi đó, sìpam )

[flexbex]

Hello Diyodira i send you new message. I have my workshop now. :-)

Felix

[Diyodira]

Hello Diyodira i send you new message. I have my workshop now. :-)

Felix

Ok, tomorrow I'll send the goods to you via vietel, then you will send money after receiving it.
sincerely thanks

[mylove299]

Ok, tomorrow I'll send the goods to you via vietel, then you will send money after receiving it.
sincerely thanks

Theo em bác phải viết dư này ko ông kia lại nhầm send tiền j j. " after you recieve goods and check it, if everything is ok then you pay the money for the post officer " e cũng dốt nên viết vậy thôi he he

[Diyodira]

[QUOTE=mylove299;147905]Theo em bác phải viết dư này ko ông kia lại nhầm send tiền j j. " after you recieve goods and check it, if everything is ok then you pay the money for the post officer " e cũng dốt nên viết vậy thôi he he[/QUỢTE]

Thuc ra cũng nói thêm thôi chứ đã bàn kỹ ở phí trên rồi, mà mình cũng định nhờ một bác nào ở ngòai ấy nhận dùm rồi giao dịch với anh tây mà ngại quá, vì sợ việc giao nhận có khó khăn gì với a ấy không?