Cà rem quăng lụ đạn rồi để đấy, làm mất công đi tìm câu trả lời quá à:
- SHS: Since each row of balls is arranged at a contact angle of 45°, this model can be used in all directions.
- HSR: A global standard size LM Guide in which each row of balls is placed at a contact angle of 45° so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations.
- SSR: The compact design with a low sectional height and the ball contact structure at 90° in the radial direction make this model an optimal model for horizontal guide units.
em chỉ tìm hiểu 1 số ray thông dụng thế thôi, trên là định nghĩa sơ sơ cho mỗi lạoi ray, muốn rõ thì phải coi tài liệu à.
Về cơ bản e thấy thằng SHS, HSR đặt kiểu nào cũng đc. Chỉ có thằng SSR nên đặt nằm ngửa